Rohs certificate 3d printer filament pla 1.75 mm 2.2lbs 1kg / spool
Why do you choose master spool?
1.With reusable master spool, we can cut down a lot of waste!
2.There is no need to throw away the spool after finishing the filament.
3. Save some shipping weight.
Product
PLA (Polylactic acid) is thermoplastic aliphatic polyester made of renewable resources like corn or starch. Its extrusion-temperature is much lower than ABS, and most often doesn't require a heated bed. It has the following characteristics:
Good toughness high strength, high stiffness ;
No block nozzle, good stick hot bed, a smooth PLA used
Can be processed at 185 degrees
Low shrinkage, thermoforming dimensional stability
| Material | PLA 3d printing material |
| Diameter | 1.75/2.85mm |
| Diameter Tolerance | ±0.02/±0.03mm |
| Net weight | 1kg |
| Surface | Glossy |
| Printing Temperature | 190℃~210℃ |
| Bed Temperature | 0~80℃ |
| Layer Thickness | 0.1~0.3mm |
| Print Speed | 20~50mm/s |
| Color | 60 colors |
Package
Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum packed—›Inner box;
black spool size : in poly bag(Vacuum packing) with a desiccant bag inside
Filament with spool
Inner box size: 20.8 X 20.8X 7.3cm
I : 4 box/carton carton size : 43.5 X 43.5 X 8cm
II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm
III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm
Filament without spool
Inner box size: 18.5*18.5*7cm
12 box/carton carton size : 39*39*23.5cm
| Shipping Way | Time control | Remark | country |
| By express (FedEx,DHL,UPS,TNT etc.) | 3-7 days | Fast,suit for trial order | all over the world |
| By Air | 7-10 days | Fast(small or mass order) |
| By Sea | 15~30 days | For mass order,economic |
A1:Are you factory ?
N1:Yes,welcome to visit our factory at any time.
A2:All product have a warranty ?
N2:Yes,all kinds of our products have 1 years warranty at least.
A3:what is the payment terms?
N3:T/T,paypal,alipay etc.
A4:Can we disigh packing ?
N4:Yes.
A5:Can we print our logo on the product?
N5:Yes,We can do it for you.
A6:Can we customize product?
N6:Yes, OEM&ODM is welcome.
A7:Filament not extruding properly?
N7:Check the type of filament you're working with and set the proper extruder temperature base on the type and heated build platform if applicable;trial and error.Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament,then decrease the temperature by 5°C until properly extruded.Please note this will vary with each 3D printer.
Product Tags:
|
|
Rohs Certificate 2.85mm PLA 3D Printer Filament Low Shrinkage Eco Friendly Images
|
